Close
Filters
Apply Filters

NARROW DOWN


PRICE
-


BRAND
-

Expeditionary Military Supplies and Tactical Gear

CAMEL MANUFACTURING - EXTREME WEATHER LINER
$0.00
The Camel Extreme Weather Liner has been successfully designed and developed into multiple components for ease of set up, strike, and packing. The insulated liner is fabricated from Climashield FR-SH Insulation 185 gram insulation. Our (insulated) liners are designed to assist field heaters and air conditioners at maintaining specific temperature ranges inside the shelter during operational use. Design considerations took into account the intent to limit lost air through openings and unprotected areas. Accordingly, liners were designed to overlap and fill vacancies and openings that can enable temperature loss. Camel provides insulated liner kits for a variety of military specification and COTS shelter systems. Camel has the capability to manufacture liner kits to your engineering drawings, or can reverse engineer parts supplied to fit your shelter applications.

  • Climashield FR-SH Insulation 185 gram
  • Berry Compliant
  • Thickness 1.6 cm
  • Flammability meets ASTM D6413
  • Basic Weight oz/yd2 9.5
  • Acoustic Performance STM E 1050 – 6300 (HZ) 0.49
  • Absorption Coefficient
  • No special tools required for installation
  • 55% reduction in fuel consumption for heating/cooling
  • Minimize number of convoys needed to resupply fuel
Add To Cart
X
Quantity:
GENESIS J.I.T.  3KW POWER DISTRIBUTION REEL
$0.00
Energy generation and distribution in austere environments is a strategic and tactical challenge. CECOM Message DTG 281316Z Feb 19 states "Temporary power distribution from the 3kW generator load terminals can be accomplished with the 3kW Power Distribution Reel (PN: GEN-2014101TN) manufactured by Genesis J.I.T., distributed by ADS, Inc. and available on GSA Schedule GS-07F-6072P (Schedule 78).

The GEN-2014101TN-2 POWER DISTRIBUTION CABLE REEL has been specifically designed for the 3kW Tactical Quiet Generator. A ruggedized steel cable reel that is per-wired with 50 feet of 12/3 cable, this system is based on a capability gap in small power distribution encountered by Army, Air Force, Navy and Marine Corps units. Configured to meet the needs of the war fighter in any operational environment.

SYSTEM CONFIGURATION:

  • Outlets: 1 dual commercial 120V GFCI 20A/1 dual commercial 120V 20A
  • Breaker: Hydraulic magnetic switch/breakers
  • Indicators: Panel mounted LED indicator light
  • Extension Cable: 50ft SJOOW 12/3
  • Connectors: Optional or customer installed
  • Reel: Steel, powder coated (desert tan)
  • Enclosure: H 6" x D 7" x W 6"
  • Reel Dimensions: Diameter 13", Height: 19", Weight: 21 lbs
KEY BENEFITS:

  • Hydraulic breakers are NOT affected by heat or cold
  • GFCI adds an additional layer of protection from accidental electrocution
Buy Now On GSA Arrow
Add To Cart
X
Quantity:
CAMEL MANUFACTURING - LME
$0.00
The LME is a frame supported lightweight shelter designed to provide units with a covered facility to conduct tactical maintenance operations. The LME is a modification of the Tent, Extendable, Modular, PERsonnel (TEMPER) where extensions are added to the tent frame to add the height needed for enclosure of tactical vehicle and equipment. The end walls have been modified with sliding fabric doors permitting total enclosure during conditions of extreme weather or blackout. The LME has 18-inch diameter duct openings in each of the 16 ft. intermediate fabric sections located below the windows. The U.S. Army and U.S. Marine Corps have adopted the LME as their standard maintenance shelter.

  • Clear interior span of 24' x 32' (768 ft2)
  • Eave height of 12 ft.
  • Peak height of 15 ft. 6 in.
  • Packed Weight of 1,435 lbs.
  • Packed Volume of 108 ft3
  • Successfully completed military durability, snow and wind loads performed by the US Army Aberdeen Test Center
Add To Cart
X
Quantity:
CAMEL MANUFACTURING - MGPTS TYPE I
$0.00
The Modular General Purpose Tent System (MGPTS) utilizes tensioned fabric to create a structure which distributes wind, rain and snow loads from the fabric directly to the support system. Because of this design, the MGPTS distributes loads more efficiently with lighter support systems than conventional GP tents. The MGPTS serves as billeting, command and control, unit supply and field services shelters. The modular design consists of one type end and intermediate sections, one type of end pole, one type of side pole, and one internal Y-pole. The system is 18 feet wide and can be extended indefinitely by adding 18 foot intermediate sections.
Add To Cart
X
Quantity:
CAMEL MANUFACTURING - PIONEER SERIES TENTS
$0.00
The Pioneer Series are frame supported expeditionary shelters with fast erect and strike capabilities. The frame is manufactured from aircraft grade aluminum with its members connected using injection molded multi-functional hubs. Each Pioneer Series system comes equipped with a 6'x16' screened area allowing you to enjoy your surroundings without being troubled by inclement weather or insects.
Add To Cart
X
Quantity:
CAMEL MANUFACTURING - PIONEER HUB
$0.00
The Pioneer Hub is a shelter with a clear span of 16' in each direction with 4 walls whose configuration is chosen by the customer. This shelter can be set up and taken down without the use of tools, ladders, or mechanical assistance. This shelter can be used as a standalone unit or accompanied with any of the Pioneer Series tent systems to create a complex of under canopy shelters for whatever application users require.

  • Clear interior span of 16' x 16' (256 square feet)
  • Eave Height of 6 ft.
  • Peak Height of 9 ft. 4 in.
  • Frame Bag 1: 18"W x 8"H x 83"L, 107 lbs.
  • Frame Bag 2: 18"W x 8"H x 83"L, 109 lbs.
  • Fabric Bag: 30"W x 10"H x 36"L, 136 lbs. (Weight can vary depending upon wall configurations an optional add on items)
  • Crew Size for Erect/Strike: 3 person
  • Available Wall Selections: Plain Wall, Door Wall, Hard Door Wall, Door Wall with Windows, Screen Wall
  • Available Add-Ons: Hard Door, Monitor Bracket, Projector Mount, Extreme Weather Liner, Floor
Add To Cart
X
Quantity:
EXPEDITIONARY BUILDING SYSTEMS (EBS) - FLAT PACK B-HUTS
$0.00
EBS Developed a flat pack B-Hut system that is rapidly deployable and can be specified in either a 463L(15x30) deployment configuration or a containerized(16x32) deployment configuration. Each B hut is designed to be erected by a crew of 4 persons in 4hours including electrical lighting and HVAC

Add To Cart
X
Quantity:
Dogwood Industries - ConTEMProof-RD
$0.00
Dogwood's ConTEMProof-RD is a complete building solution packaged in 20' containers for simplified shipping, storage and deployment. Dimensions are65' interior clear span x 31'7" to the eave. Rapidly deployable with minimum equipment and manpower. Features hard sided steel panel construction and is fully relocatable. Includes robust environmental load resistance for global deployment. Soil supported modular footing system. Blast and ballistic resistant.

Add To Cart
X
Quantity:
Bren-Tronics - 1.75 kWh Portable Power System
$0.00
The 6-PACK APU is a BB-2590/U based Portable Power System. Comprised of six (6) BB-2590/U batteries packed into a rugged, watertight container capable of acting as an Uninterruptible Power Supply (UPS), or standalone battery unit. Output can range from 1.2 kWh to 1.75 kWh with the ability to increase as higher capacity BB-2590/U batteries are available. Depending on the power consumption, the 6-PACK is capable of providing continuous power for over one week in stand alone more or indefinite operation when connected for a power source. The Bren-Tronics 6-PACK provides versatility needed by the warfighter to power their mission with one piece of equipment.

FEATURES:
  • Dimensions (LxWxH): 12.8 in (325 mm) x 10.8 in (274 mm) x 11.3 in (287 mm)
  • Weight: 21 lb (9.5 kg) without batteries or 39 lbs (18 kg) with batteries
  • BB-2590/U batteries are sold separately.
Add To Cart
X
Quantity:
Bren-Tronics - AN/PRC-148; 10.8V, 6.4Ah Rechargeable Lithium-Ion Battery
$0.00
This is the best AN/PRC-148 built battery today. Run time is over 40% improvement over the standard commo shop AN/PRC-148 battery. Meets or exceeds all military rechargeable durability specifications. Works in all variants of the AN/PRC-148 & WAVE radio.Communicates using a single wire DQ interface. Recommended charging platforms include Bren-Tronics SPC, SPC Lite, VMC, VMC Lite, Solar Charger Controllers, and single-station chargers.

FEATURES:
  • Dimensions (LxWxH): 2.8 in (71 mm) x 1.6 in (41 mm) x 0.75 in (86 mm)
  • Weight: 0.75 lb (0.34 kg)
  • Connector has flat contact (bottom), Fly Wheel Connection (top)
  • MAX Power 8 Amp
Add To Cart
X
Quantity:
Bren-Tronics - ADAPTER, SPC, SPC LITE, MBITR, J-6588/P
$0.00
Soldier Portable Charger (SPC) and SPC Lite adapter which holds 2 MBITR (AN/PRC-148) Lithium-Ion batteries. It is one of many Interchangeable adapters within the Bren-Tronics family of adapters for these two versatile SPC and SPC lite chargers. It can hold one (1) or two (2) batteries on either SPC or SPC Lite chargers. When used on a SPC charger, it can hold one (1) to four (4) adapters. When used on the SPC Lite charger it can hold one (1) adapter.

FEATURES:

  • Dimensions (LxWxH): 3. 5in (89mm) x 5. 5in (140mm) x 2. 4in (62mm)
  • Weight: 0. 56lb (0. 25kg)
Add To Cart
X
Quantity:
Bren-Tronics - ADAPTER, SPC/SPC LITE, BB-2590/390, J-6358B/P
$0.00
Soldier Portable Charger (SPC) adapter for BB-2590/U, BB-390B/U and BB-590/U batteries. It can hold one (1) or two (2) batteries on either SPC or SPC Lite chargers. When used on a SPC charger, it can hold one (1) to four (4) adapters. When used on the SPC Lite charger it can hold one (1) adapter.

FEATURES:
  • Dimensions (LxWxH): 3. 5in (89mm) x 5. 5in (140mm) x 1. 7in (43mm)
  • Weight: 0. 56lb (0. 26kg)
Add To Cart
X
Quantity:
Bren-Tronics - BB-2590/U, 28.8V, 7.5Ah Rechargeable Lithium-Ion Battery
$0.00
The only BB-2590/U qualified for Military use since 2004. Includes SMBus v1.1 and SBData v1.1. plus an absolute state of charge indicator that comes in two (2) separate five (5) segment LCD's with constant display. Typically used in SINCGARS & ATCS, Falcon radios, robots, and surveillance/sensors. Recommended charging platforms include Bren-Tronics SPC, SPC Lite, VMC, VMC Lite, and Solar Charge Controllers, as well as Single-Station Chargers.

FEATURES:
  • Dimensions (LxWxH): 4.4 in (112 mm) x 2.4 in (61 mm) x 5.0 in (127 mm)
  • Weight: 3.1 lb (1.4 kg)
  • Built to the same spec (MIL-PRF-32052/1) as the BT-70791A
Add To Cart
X
Quantity:
Bren-Tronics - RECHARGEABLE LI-ION BATTERY,FULL SMP, 110WH
$0.00
The 10. 8V, 9. 6Ah Rechargeable Lithium-Ion Battery includes SMBus v1. 1 and SBData v1. 1, plus an absolute State-of-Charge indicator with five (5) segment LCD with constant display. Typically used in Soldier Systems: Land Warrior Programs and International Soldier Modernization Programs. Recommended charging platforms include Bren-Tronics SPC, SPC Lite, VMC, VMC lite, and Solar Charger Controllers.

FEATURES:
  • Dimensions (LxWxH):
  • 7. 8in (198mm) x 3. 0in (77mm) x 0. 98in (25mm)
  • Weight: 1. 3lb (0. 6kg)
Add To Cart
X
Quantity:
Bren-Tronics - Dual Desktop AN/PRC-148 Battery Charger
$0.00
The Dual Desktop charger that will charge one or two PRC-148 batteries (sold separately) in 4 hours or less. Powered from 100-240V AC, this charger is a simple solution for the user who does not require a bulk or multi-station charger.

FEATURES:
  • Charger Dimensions (LxWxH): 3.5 in (89 mm) x 5.5 in (140 mm) x 2.8 in (60 mm)
  • Power supply Dimensions (LxWxH): 3.8 in (97 mm) x 2.4 in (62 mm) x 1.3 in (32 mm)
  • Cable Length: 72 in
  • Weight: 1.4 lb (0.64 kg)
Add To Cart
X
Quantity:
Bren-Tronics - X90 Scavenger BA-5590
$0.00
The X90 Scavenger allows the user to scavenge power from a non-rechargeable X90 type battery such as the BA-5590 or BA-5390 batteries. When used with multi-chem charger BTC-70824-2 you have a very light weight charger combination. Because most BA-5590/BA-5390's are discarded with more than 30% energy remaining, the Bren-Tronics X90 Scavenger maximizes their use. Also works with all rechargeable versions of the X90 battery line.

FEATURES:
  • Dimensions (L): 8. 0in (203mm)
  • Weight: 0. 37lb (0. 17kg)
Add To Cart
X
Quantity:
Bren-Tronics - USB Dual Port Charger for AN/PRC-148 and AN/PRC-152 Handheld Radios
$0.00
The USB Dual Port Charger provides a 5V power source and two (2) ports 3.1A output total. Its internal protection circuitry automatically shuts down in case of output shorts, excessive current draw, and temperature overload. Adaptive mobile device handshake supports wide variety of USB chargeable and powered devices. Its DC input provides the ability to charge with the Bren-Tronics Charger Module and Battery Status Meter.

FEATURES:
  • Dimensions (LxWxH): 2.62 in (66.55 mm) x 1.61 in (40.89 mm) x 1.14 in (28.96 mm)
  • Weight: 0.13 lb (0.06 kg)
Add To Cart
X
Quantity:
Bren-Tronics - Dismounted CREW Systems Capacity Battery
$0.00
The Dismounted CREW Systems capacity battery version of the Bren-Tronics battle proven and government tested BB-2590/U. Built to satisfy a robust DOD requirement. Typically used in SINCGARS & ATCS, Falcon radios, robots, and surveillance/sensors. Recommended charging platforms include Bren-Tronics SPC, SPC Lite, VMC, VMC Lite, and Solar Charge Controllers, as well as Single-Station Chargers.

FEATURES:
  • Dimensions (LxWxH): 4.4 in (112 mm) x 2.4 in (61 mm) x 5.0 in (127 mm)
  • Weight: 3.1 lb (1.4 kg)
  • Built to the same spec (MIL-PRF-32052/1) as the BT-70791A (only BB-2590/U qualified since 2004).
Add To Cart
X
Quantity:
Bren-Tronics - DUAL DESKTOP CHARGER, 2-BAY, AN/PRC-152
$0.00
The Dual Desktop charger for AN/PRC-152 Falcon radio battery. It will charge one (1) or two (2) Falcon radio (AN/PRC152) batteries. Powered from 100V-240V AC, this charger offers a simple solution for users that doesn't require bulk/multiple station chargers.

FEATURES:
  • Charger Dimensions (LxWxH): 3. 5in (89mm) x 5. 5in (140mm) x 2. 8in (60mm)
  • Power Supply Dimensions (LxWxH): 3. 8in (97mm) x 2. 4in (62mm) x 1. 3in (32mm)
  • Cable Dimensions (L): 72in (1829mm)
  • Weight: 1. 4lb (0. 64kg)
Add To Cart
X
Quantity:
Bren-Tronics - CHARGING CAP, BB-2590/390/2557
$0.00
Dedicated single-station multi-chemistry battery cap charger that accepts AC, DC and Solar Power to provide charging capabilities for battery models such as the BB-2590/U, BB-390B/U and BB-2557/U. Powered from 20V-30V DC and equipped with a two-pin 'trailer hitch' connector. When used with Scavenger (BTA-70768) you have a very light weight charger combination. BA-5590/5390's are discarded with more than 30% energy remaining, thus Bren-Tronic's x90 Scavenger maximizes their use. Recommended for the user who does not require a bulk or multi-station charger.

FEATURES:
  • Charger Dimensions (LxWxH): 3. 3in (84mm) x 2. 2in (56mm) x 2. 0in (51mm)
  • Cable Dimensions (L): 8. 8in (203mm)
  • Security Strap Dimensions (L): 13. 5in (343mm)
  • Weight: 0. 38lb (0. 17kg)
Add To Cart
X
Quantity: