EQUIPMENT

The master switch allows for lighting system control from the door of the shelter.

Offering rugged construction and high performance, the Jameson LED floodlight was designed to go wherever the job takes you.

Jameson's lightweight floodlight is battery-powered with an integrated carrying handle for maximum portability.

The compact Stubby® light is a heavy-duty fluorescent work light that demonstrates superior impact resistance while providing a bright white light to illuminate your work area.

This portable work light features a shock-absorbing handle and end cap as well as a shatterproof tube for rugged durability. Meets ASTM specifications for water resistance.

LED Work Light, AC Powered, 50' Power Cord. To meet the demand for greener lighting, Jameson developed LED work lights with the same design durability of our fluorescent models. LED technology offers reduced power consumption and a longer life.

PAXLight® 36 inch Focal Length in Case - Field Hospital Light in Transport Case.

The PAXLight is a single minor surgical luminaire intended for use in the patient environment to support treatment and diagnosis which can be interrupted without any hazard to the patient in case of failure of the light.

The luminaire has three LED light sources on a single head. The product is suitable for use in operating rooms.

The ASPEN 1000DM is a lightweight highly mobile completely self contained water purification system with war fighter ready technology making it the easiest to deploy, maintain, and monitor of any Military Reverse Osmosis purification system in existence. The Aspen 1000DM is not only energy efficient, but includes a redundant purification system (Reverse Osmosis and Ultra Violet Sterilization) providing the safest drinking water possible in all conditions. The ASPEN 1000DM is 5 times more energy efficient than a conventional AC system and provides wire to water at 15 watts per gallon. Utilizing the Aspen energy recovery system, the 1000DM operates on less than half of the energy requirement for a hair dryer, or less than 650 watts. Total usage is 1.5 KW per 1000 gallons, rivaling large commercial units on efficiency and never before available in such a small system. The unit operates from single phase in 90 to 240 volts AC in either 50/60 hertz or from a 24/28 volt DC source (US/NATO vehicles) and will automatically recognize the varying power sources.

The ASPEN 1500RO is a lightweight, highly mobile, completely self-contained water purification system with war fighter ready technology. The easiest to deploy, maintain, and monitor of any Military Reverse Osmosis purification system in existence. The Aspen 1500RO includes robust pre-filtration and a redundant purification system (Reverse Osmosis and Ultra Violet Sterilization) providing the safest drinking water possible in all conditions. The ASPEN 1500RO unit operates from single phase in 90 to 260 volts AC in either 50/60 hertz, or from a 24/28 volt DC source (US/NATO vehicles) and will automatically recognize the varying power sources.

The Aspen 1800BC is packaged in a Pelican carrying case. The water purification systems supplies up to 1,800 gallons per day (75 gallons per hour) of highly purified water from virtually any non-saline water source. Water can be drawn from ditches, ponds, rivers, lakes or standing water that may contain chemical or biological contamination. The replaceable mixed Media Canister effectively treats 7,500 gallons of surface water containing contaminants such as lead, barium, selenium and arsenic prior to replacement. The Media Canister also removes high levels of manmade pollutants such as petrochemicals, insecticides and solvents. When used to eliminate possible microbial contamination in clear water, the canister may be used for up to 9,000 gallons. The 1800BC is factory preset for an optimum flow rate of 1.25 gallons per minute. This flow rate is automatically controlled, monitored and governed by a proprietary electronic flow sensor.

The ASPEN 2000DM is a remote water solution that is energy efficient, portable and purifies fresh water, brackish water, as well as sea water.
This water purification system will supply 1500 to 2000 gallons per day of highly purified water from virtually any water source. Water can be drawn from the ocean, ditches, rivers, lakes or standing water that may contain chemical and/or biological contamination. The water transfer pump is powered by the DC outlet connection on the purifier. The complete package can be powered by the RDLS IV system or by military vehicles. The portable lighting system replaces bulky generator light sets and illuminates desired areas over 3000 square feet with high-intensity LED white light. Multi power from 110-260 AC 50/60 Hertz. 12 Volt to 24 DC. Remote Site Package includes:

• Aspen 2000 DM and support case
• 150-gallon (600-liter) water bladder
• Water transfer kit with hoses
• Chlorine pump assembly with tank
• RDLS IV-remote light and 2000-watt portable generator with custom case, spares, fuel tank
• Operates on 110/240 AC or 12/24 Volts DC

The ASPEN 3300M water purification system will supply 9,000 to 12,000 liters per day of highly purified water from virtually any non-saline water source. Water can be drawn from ditches, rivers, lakes or standing water that may contain chemical and/or biological contamination. The purifier has its own built-in solar charging system and storage battery to run six to eight hours a day off solar. The water transfer pump is also powered by the solar array and/or battery contained in the purifier. It can be powered by military vehicles. The remote light and power system is lightweight and man portable, replacing bulky generator light sets. It illuminates desired areas over 3000 square feet with high-intensity LED white light. Multi power from 110-260 AC 50/60 hertz, 12 volt to 24 DC.

Remote Site Package includes:

• Aspen 2000 DM and support case
• 150-gallon (600-liter) water bladder
• Water transfer kit with hoses
• Chlorine pump assembly with tank
• RDLS IV-remote light and 2000-watt portable generator with custom case, spares, fuel tank
• Operates on 110/240 AC or 12/24 Volts DC

Pillow type bladder for 300 gallons of potable water.

Generator for Aspen 2000DM; 1000DM; 1500RO; 5500M or 3300M with 3 gallon fuel can. Oil and fuel stabilizer contained in hard case/berm/generator stand. 2000 Watts.

Solar package option for aspen purifiers (360 watts) folding solar panels (5500M). Solar kits available for all other aspen water systems.

Solar package; 1.1KW (1000DM) or 1.3KW (2000DM) with battery storage; charge controller and solar panels

The ASPEN 5500M water purification system will supply 15,000 to 20,000 liters per day of highly purified water from virtually any non-saline water source. Water can be drawn from ditches, rivers, lakes or standing water that may contain chemical and/or biological contamination. The purifier has its own built in solar charging system and storage battery to run six to eight hours a day off solar. The water transfer pump is also powered by the solar array and/or battery contained in the purifier. System can be powered by Military vehicles.

The remote light and power system is a lightweight/man portable lighting system that replaces bulky generator light sets. Illuminates desired area over 3000 square feet with high-intensity LED white light. Multi power from 110-260 AC 50/60 Hertz, 12 Volt to 24 DC.

Remote site package includes:

• Aspen 5500M and support case
• 150 gallon (600 liter) water bladder
• Water transfer kit with hoses
• Three 120-watt, 12-volt solar panels with cables
• Chlorine pump assembly with tank
• RDLS IV-remote light and power system
• Operates on 110/240 AC or 12/24 Volts DC

TAD easily attaches to existing Night Vision Devices (NVDs) to increase threat detection and situational awareness. Low-power consumption, thermal sensor technology, and high-performance optics integrate seamlessly to provide advanced long-wave infrared capability. With the ability to mount on NVDs with a bracket, the need to refit helmets with special equipment is eliminated. Along with being able to withstand the harshest environments, the TAD's rugged construction is waterproof to 66 ft.

ECOTI adds a thermal overlay to the image intensified (I2) NVD scene without modification of existing hardware. It is used in extreme low-light, no-light or foliated conditions where I2 devices are limited. ECOTI improves situational awareness and increases threat detection capabilities. Its low-power consumption, thermal sensor technology and high-performance optics integrate seamlessly to provide long-wave infrared capability. With the ability to mount on NVDs with a bracket, the need to refit helmets with special equipment is eliminated. It also comes in two configurations, one with an internal battery and one with external battery.

ECOTI has HUD (Heads Up Display) capability that provides real-time, geo-referenced navigation/route execution. When used with Android devices, the NVD becomes a remote display for identifying teammates, targets and route points.

ECOSI is a multi-function device that overlays a SWIR (Short Wave Infrared) image on to a NVD image for identifying out of band SWIR aim lasers, pointers, beacons, strobes and 1064nm markers and designators during day and night operations. It has HUD (Heads Up Display) capability that provides real-time, geo-referenced navigation/route execution. When used with Android devices, the NVD becomes the HUD for identifying teammates, targets and route points.

ECOSI can also be used during the day with an optional daytime 2x adapter accessory for See-Spot operations. ECOSI's compact and lightweight design easily attaches to NVDs in mere seconds without tools using a simple bracket. It also comes in two configurations, one with an internal battery and one with external battery.

The Daytime See-Spot 2x Extender system attaches to an existing ECOSI device. When combined, it becomes a handheld or rail-mounted daytime See-Spot device with PRF (Pulse Rate Frequency) code counting and zoom capability. It was developed to provide an extra capability to see and display a laser spot created by a target marker or designator during standard daylight and bright sunlight conditions. The 2x magnification system is useful for "sighting in" targets of interest from a distance.

The Daytime See-Spot 2x Extender system for ECOSI is compact and lightweight, adding a measure of confidence to improve speed at which hostile targets can be eliminated. It reduces the incidence of battlefield targeting errors, collateral damage and fratricide.

COSMO is a compact, lightweight See-Spot device capable of detecting and visualizing SWIR (Short Wave Infrared) designators, markers, pointers and strobes. It can be used in a rail-mounted or handheld configurations and is small enough to fit into most plate carrier pouches.

The user can easily detect and observe laser marks from rotary wing, ISR and CAS platforms above or on the ground from a JTAC, JFO or FO self-employed laser designator/marker. It allows the user to confidently and accurately aim a designator or marker and visualize the precise position of mark on the target.

COSMO is equipped with a multi-PRF (Pulse Rate Frequency) code counting APD (Avalanche Photodiode) that will detect and display up to three codes simultaneously.

SLAM D is a tripod-mountable high-power designator that also has a high-power NIR pointer with pulse feature, see-spot observation device with laser spot tracking and PRF code counting, and a handheld laser acquisition marker. Users can now carry, and rapidly utilize a multi-role laser device for all close air support situations, regardless of range to target. SLAM D fills the role of multiple battlefield devices, providing enhanced situational awareness in a single device that is over 30% smaller and lighter than other "designator only" devices in use today.

CTAM is a rail-mounted, compact, lightweight, multi-function laser system. It combines several capabilities into a single device. Its capabilities include a 1064nm PRF (Pulse Rate Frequency) coded designator for acquisition and target handoff, aiming lasers for firing a primary weapon, a high powered NIR (Near Infrared) pointer function with pulse feature, and a NIR illumination laser with digitally adjustable beam divergence for IR flood light capability.

CTAM can be used handheld or mounted to the Picatinny rail on any primary weapon or handheld targeting device.

Its compact design allows for it to be easily stowed in any plate carrier pouch. It has an intuitive user interface that is easy to read and displays active system modes, PRF laser codes and menu features.

ICUGR is a multi-function laser system that incorporates aiming, illumination and rangefinding into a single device. It mounts to any Picatinny rail and can be used with all types of military sniper, CQB or crew-served weapon systems and all types of bullet designs and calibers. The simple two-button design on the device or via remote allows for ease of use so that the operator's hands never have to leave the weapon.

ICUGR can be tethered to a Kestrel® with Applied Ballistics and will display accurate ballistic solutions that include climate conditions like wind, altitude, humidity, temperature and barometric pressure for long-range shooting.

ICUGR can also be used in conjunction with NVDs in night vision mode.