GENERAL EXPEDITIONARY

The ASPEN 1000DM is a lightweight highly mobile completely self contained water purification system with war fighter ready technology making it the easiest to deploy, maintain, and monitor of any Military Reverse Osmosis purification system in existence. The Aspen 1000DM is not only energy efficient, but includes a redundant purification system (Reverse Osmosis and Ultra Violet Sterilization) providing the safest drinking water possible in all conditions. The ASPEN 1000DM is 5 times more energy efficient than a conventional AC system and provides wire to water at 15 watts per gallon. Utilizing the Aspen energy recovery system, the 1000DM operates on less than half of the energy requirement for a hair dryer, or less than 650 watts. Total usage is 1.5 KW per 1000 gallons, rivaling large commercial units on efficiency and never before available in such a small system. The unit operates from single phase in 90 to 240 volts AC in either 50/60 hertz or from a 24/28 volt DC source (US/NATO vehicles) and will automatically recognize the varying power sources.

The ASPEN 1500RO is a lightweight, highly mobile, completely self-contained water purification system with war fighter ready technology. The easiest to deploy, maintain, and monitor of any Military Reverse Osmosis purification system in existence. The Aspen 1500RO includes robust pre-filtration and a redundant purification system (Reverse Osmosis and Ultra Violet Sterilization) providing the safest drinking water possible in all conditions. The ASPEN 1500RO unit operates from single phase in 90 to 260 volts AC in either 50/60 hertz, or from a 24/28 volt DC source (US/NATO vehicles) and will automatically recognize the varying power sources.

The Aspen 1800BC is packaged in a Pelican carrying case. The water purification systems supplies up to 1,800 gallons per day (75 gallons per hour) of highly purified water from virtually any non-saline water source. Water can be drawn from ditches, ponds, rivers, lakes or standing water that may contain chemical or biological contamination. The replaceable mixed Media Canister effectively treats 7,500 gallons of surface water containing contaminants such as lead, barium, selenium and arsenic prior to replacement. The Media Canister also removes high levels of manmade pollutants such as petrochemicals, insecticides and solvents. When used to eliminate possible microbial contamination in clear water, the canister may be used for up to 9,000 gallons. The 1800BC is factory preset for an optimum flow rate of 1.25 gallons per minute. This flow rate is automatically controlled, monitored and governed by a proprietary electronic flow sensor.

The ASPEN 2000DM is a remote water solution that is energy efficient, portable and purifies fresh water, brackish water, as well as sea water.
This water purification system will supply 1500 to 2000 gallons per day of highly purified water from virtually any water source. Water can be drawn from the ocean, ditches, rivers, lakes or standing water that may contain chemical and/or biological contamination. The water transfer pump is powered by the DC outlet connection on the purifier. The complete package can be powered by the RDLS IV system or by military vehicles. The portable lighting system replaces bulky generator light sets and illuminates desired areas over 3000 square feet with high-intensity LED white light. Multi power from 110-260 AC 50/60 Hertz. 12 Volt to 24 DC. Remote Site Package includes:

• Aspen 2000 DM and support case
• 150-gallon (600-liter) water bladder
• Water transfer kit with hoses
• Chlorine pump assembly with tank
• RDLS IV-remote light and 2000-watt portable generator with custom case, spares, fuel tank
• Operates on 110/240 AC or 12/24 Volts DC

The ASPEN 3300M water purification system will supply 9,000 to 12,000 liters per day of highly purified water from virtually any non-saline water source. Water can be drawn from ditches, rivers, lakes or standing water that may contain chemical and/or biological contamination. The purifier has its own built-in solar charging system and storage battery to run six to eight hours a day off solar. The water transfer pump is also powered by the solar array and/or battery contained in the purifier. It can be powered by military vehicles. The remote light and power system is lightweight and man portable, replacing bulky generator light sets. It illuminates desired areas over 3000 square feet with high-intensity LED white light. Multi power from 110-260 AC 50/60 hertz, 12 volt to 24 DC.

Remote Site Package includes:

• Aspen 2000 DM and support case
• 150-gallon (600-liter) water bladder
• Water transfer kit with hoses
• Chlorine pump assembly with tank
• RDLS IV-remote light and 2000-watt portable generator with custom case, spares, fuel tank
• Operates on 110/240 AC or 12/24 Volts DC

Pillow type bladder for 300 gallons of potable water.

Generator for Aspen 2000DM; 1000DM; 1500RO; 5500M or 3300M with 3 gallon fuel can. Oil and fuel stabilizer contained in hard case/berm/generator stand. 2000 Watts.

Solar package option for aspen purifiers (360 watts) folding solar panels (5500M). Solar kits available for all other aspen water systems.

Solar package; 1.1KW (1000DM) or 1.3KW (2000DM) with battery storage; charge controller and solar panels

The ASPEN 5500M water purification system will supply 15,000 to 20,000 liters per day of highly purified water from virtually any non-saline water source. Water can be drawn from ditches, rivers, lakes or standing water that may contain chemical and/or biological contamination. The purifier has its own built in solar charging system and storage battery to run six to eight hours a day off solar. The water transfer pump is also powered by the solar array and/or battery contained in the purifier. System can be powered by Military vehicles.

The remote light and power system is a lightweight/man portable lighting system that replaces bulky generator light sets. Illuminates desired area over 3000 square feet with high-intensity LED white light. Multi power from 110-260 AC 50/60 Hertz, 12 Volt to 24 DC.

Remote site package includes:

• Aspen 5500M and support case
• 150 gallon (600 liter) water bladder
• Water transfer kit with hoses
• Three 120-watt, 12-volt solar panels with cables
• Chlorine pump assembly with tank
• RDLS IV-remote light and power system
• Operates on 110/240 AC or 12/24 Volts DC

The Camel Extreme Weather Liner has been successfully designed and developed into multiple components for ease of set up, strike, and packing. The insulated liner is fabricated from Climashield FR-SH Insulation 185 gram insulation. Our (insulated) liners are designed to assist field heaters and air conditioners at maintaining specific temperature ranges inside the shelter during operational use. Design considerations took into account the intent to limit lost air through openings and unprotected areas. Accordingly, liners were designed to overlap and fill vacancies and openings that can enable temperature loss. Camel provides insulated liner kits for a variety of military specification and COTS shelter systems. Camel has the capability to manufacture liner kits to your engineering drawings, or can reverse engineer parts supplied to fit your shelter applications.

• Climashield FR-SH Insulation 185 gram
• Berry Compliant
• Thickness 1.6 cm
• Flammability meets ASTM D6413
• Basic Weight oz/yd2 9.5
• Acoustic Performance STM E 1050 – 6300 (HZ) 0.49
• Absorption Coefficient
• No special tools required for installation
• 55% reduction in fuel consumption for heating/cooling
• Minimize number of convoys needed to resupply fuel

The Pioneer Hub is a shelter with a clear span of 16' in each direction with 4 walls whose configuration is chosen by the customer. This shelter can be set up and taken down without the use of tools, ladders, or mechanical assistance. This shelter can be used as a standalone unit or accompanied with any of the Pioneer Series tent systems to create a complex of under canopy shelters for whatever application users require.

• Clear interior span of 16' x 16' (256 square feet)
• Eave Height of 6 ft.
• Peak Height of 9 ft. 4 in.
• Frame Bag 1: 18"W x 8"H x 83"L, 107 lbs.
• Frame Bag 2: 18"W x 8"H x 83"L, 109 lbs.
• Fabric Bag: 30"W x 10"H x 36"L, 136 lbs. (Weight can vary depending upon wall configurations an optional add on items)
• Crew Size for Erect/Strike: 3 person
• Available Wall Selections: Plain Wall, Door Wall, Hard Door Wall, Door Wall with Windows, Screen Wall
• Available Add-Ons: Hard Door, Monitor Bracket, Projector Mount, Extreme Weather Liner, Floor

The Pioneer Series are frame supported expeditionary shelters with fast erect and strike capabilities. The frame is manufactured from aircraft grade aluminum with its members connected using injection molded multi-functional hubs. Each Pioneer Series system comes equipped with a 6'x16' screened area allowing you to enjoy your surroundings without being troubled by inclement weather or insects.

The Modular General Purpose Tent System (MGPTS) utilizes tensioned fabric to create a structure which distributes wind, rain and snow loads from the fabric directly to the support system. Because of this design, the MGPTS distributes loads more efficiently with lighter support systems than conventional GP tents. The MGPTS serves as billeting, command and control, unit supply and field services shelters. The modular design consists of one type end and intermediate sections, one type of end pole, one type of side pole, and one internal Y-pole. The system is 18 feet wide and can be extended indefinitely by adding 18 foot intermediate sections.

The LME is a frame supported lightweight shelter designed to provide units with a covered facility to conduct tactical maintenance operations. The LME is a modification of the Tent, Extendable, Modular, PERsonnel (TEMPER) where extensions are added to the tent frame to add the height needed for enclosure of tactical vehicle and equipment. The end walls have been modified with sliding fabric doors permitting total enclosure during conditions of extreme weather or blackout. The LME has 18-inch diameter duct openings in each of the 16 ft. intermediate fabric sections located below the windows. The U.S. Army and U.S. Marine Corps have adopted the LME as their standard maintenance shelter.

• Clear interior span of 24' x 32' (768 ft2)
• Eave height of 12 ft.
• Peak height of 15 ft. 6 in.
• Packed Weight of 1,435 lbs.
• Packed Volume of 108 ft3
• Successfully completed military durability, snow and wind loads performed by the US Army Aberdeen Test Center

EMI protected LED shelter light. Compact enough to leave in the shelter dureing storage. Mounts close to roof line for more head room with miltiple options for attachment

The master switch allows for lighting system control from the door of the shelter.

Offering rugged construction and high performance, the Jameson LED floodlight was designed to go wherever the job takes you.

Jameson's lightweight floodlight is battery-powered with an integrated carrying handle for maximum portability.

Large area light for both teporary and perminante structuers. Perfect for maintenance bays and aircraft hangers. Come in a many different configurations to fit any need.

PAXLight® 36 inch Focal Length in Case - Field Hospital Light in Transport Case.

The PAXLight is a single minor surgical luminaire intended for use in the patient environment to support treatment and diagnosis which can be interrupted without any hazard to the patient in case of failure of the light.

The luminaire has three LED light sources on a single head. The product is suitable for use in operating rooms.

LED Work Light, AC Powered, 50' Power Cord. To meet the demand for greener lighting, Jameson developed LED work lights with the same design durability of our fluorescent models. LED technology offers reduced power consumption and a longer life.

The compact Stubby® light is a heavy-duty fluorescent work light that demonstrates superior impact resistance while providing a bright white light to illuminate your work area.

This portable work light features a shock-absorbing handle and end cap as well as a shatterproof tube for rugged durability. Meets ASTM specifications for water resistance.