Personal Protective Equipment (PPE)
- Plutonite lens material blocks 100% of all UVA, UVB, UVC and harmful blue light up to 400nm.
- Protection against sand, wind and dust
- Full compatibility with PASGT, CVC, ACH and MICH helmets
- Low offset lens geometry provides full compatibility with helmet-mounted night >vision devices
- Fully compliant with all ANSI Z87.1-2003 optical performance requirements
- Distortion-free optics via patented Oakley HDO (High Definition Optics) that minimize prismatic power and refraction and optimize clarity
- Performance of permanent anti-fog lens coating
- 15,000 rpm fan pumps 864 cubic inches of cooling air every minute
- Ultra low noise signature maintains stealth
- Patented Polaric Ellipsoid Geometry maintains clarity at all angles of vision, even at lens periphery
- Closed-cell face foam provides sweat control
- Low-profile geometry with lateral curvature maximizes the field of view
- Anti-fogging treatment helps maintain a CLEAR field of vision
- Plutonite shield blocks 100% of all UVA, UVB, UVC and harmful blue light
- High-mass and high-velocity impact protection exceeds ANSI Industrial Standards Z87.1
- Meets MIL-V-43511C Standards
- Hermetically sealed power unit provides six hours of runtime with one L91 AA battery
- Complies with ANSI Z87.1-2003, MIL-DTL-43511, EN-166 BT K and US Army MCEPS
- Complies with MIL-DTL-43511 ballistic impact resistance requirements in all lens configurations
- Made in the USA
- Durability and all-day comfort of lightweight, stress-resistant O Matter® frame material
- Comfort and performance of Three-Point Fit that holds the lenses in precise optical alignment
- Unobtainium components that increase grip when you sweat
- The XL version of our Half Jacket 2.0 model has larger lenses which provide greater peripheral coverage.
- Durability and all-day comfort of lightweight, stress resistant O Matter® frame material
- Optimized peripheral vision and side protection of 8.75 base lens curvature
- Comfort and performance of Three-Point Fit that holds lenses in precise optical alignment
- Optical precision and performance that meets ANSI Z87.1 standards for high-mass and
- high-velocity impact
- UV protection of Plutonite® lens that filters out all of UV & harmful blue light up to 400nm
- Adapt to variable light conditions with "Transitions® SOLFX™" photochromic lenses
- Multiple interchangeable Unobtainium nose pads options for customizable and comfortable secure fit
- Lightweight O Matter™ frame equipped with Unobtainium® increases grip and Three-Point Fit precisely holds the lens in place for optical alignment.
- HDO® Optics with Plutonite® lens technology provides optical clarity while blocking 100% of UVA and UVB protection
- Prizm™ lenses enhance color, contrast and detail for an optimized experience
- HDPolarized™ lenses and Iridium® lens coating both reduce glare and light transmission
- Available with Oakley Authentic Prescription lenses
- 1.4-1.6mm Scotchgard treated pig suede plus 1000 Denier Cordura®
- Specially formulated EVA for maximum step-in comfort and long lasting shock absorption
- Slip-resistant Unobtainium outsole for exceptional traction on flat surfaces in both wet and dry conditions
- Anatomically corrected for a comfortably snug, glove-like performance fit
- Gusseted tongue to block entry of water and debris
- Import
- Height of LSA is 6'
- Soft temper for instant comfort and silent movement
- Athletically inspired design for unencumbered performance and agility
- Climate control of moisture wicking liner, plus gusseted tongue to block debris entry
- Low-friction lining with anti-microbial treatment
- Prime shock absorption of lightweight polyurethane
- Jump ready design with over-the-ankle boot shaft
- Vulcanized rubber sole with traction of directional lug geometry, plus superior abrasion resistance for fast rope work
- Ergonomically optimized geometry with enhanced load-bearing stability
- Manufactured offshore
- Soft temper for instant comfort and silent movement
- Athletically inspired design for unencumbered performance and agility
- Climate control of moisture wicking liner, plus gusseted tongue to block debris entry
- Prime shock absorption of lightweight polyurethane
- Jump ready design with over-the-ankle boot shaft
- Vulcanized rubber sole with traction of directional lug geometry, plus superior abrasion resistance for fast rope work
- Ergonomically optimized geometry with enhanced load-bearing stability
- Manufactured offshore
- Directional lug design on rubber outsole provides we and dry slip resistance for both smooth and rough surfaces
- Improved outsole footprint provides greater stability for load bearing applications
- Highly abrasion resistant outsole footprint provides greater stability for load bearing applications
- Highly abrasion resistant outsole compound provides excellent durability for fast rope situations
- Abrasion resistant denier nylon provides breathability in warm environments
- Gusseted tongue prevents entry of water and debris
- Abrasion resistant toe cap and twin row stitching provide long lasting upper durability
- Jump readiness ensured by over-the-ankle boot shaft and low profile lacing system
- Prime urethane shock absorbing insole with anatomical curvature provides biomechanical support and cushioning
- Athletically inspired lightweight design allows for full-speed, unencumbered performance
- Made in USA
- Available in Temperate or Hot W eather versions
- 6 or 8 inch stack heights
- Lightweight O Matter™ frame equipped with Unobtainium® increases grip and Three-Point Fit precisely holds the lens in place for optical alignment.
- HDO® Optics with Plutonite® lens technology provides optical clarity while blocking 100% of UVA and UVB protection
- Prizm™ lenses enhance color, contrast and detail for an optimized experience
- HDPolarized™ lenses and Iridium® lens coating both reduce glare and light transmission
- Available with Oakley Authentic Prescription lenses
- Lightweight O Matter™ frame equipped with Unobtainium® increases grip and Thin Stem Technology for over-ear protection compatibility
- Three-Point Fit precisely holds the lens in place for optical alignment.
- HDO® Optics with Plutonite® lens technology provides optical clarity while blocking 100% of UVA and UVB protection
- Prizm™ lenses enhance color, contrast and detail for an optimized experience
- Meets or exceeds ANSI Z87.1 [high-mass and high-velocity]
- Available with Oakley Authentic Prescription lenses
- AR670-1 compliant
- 1000D Cordura/Suede upper
- EVA midsole and outsole
- Molded EVA insert
- Braided nylon laces
- Lace-lock system
- 8" stack height
The Ops-Core FAST Ballistic High Cut XP is a comprehensive helmet platform that offers the equivalent amount of head coverage as the MICH 2002 'Gun-Fighter' model and weighs less. The design encompasses a raised ear cut for integration with communications headsets.
- Includes Ops-Core Skeleton Shroud, Ops-Core FAST ARCs, bungees, exterior Velcro and fitband liner with integrated chinstrap weighs less than the same size MICH 2002 without any enhancements
- Lightweight multi-impact, ventilated liner with repositionable EPP pads and LDV closed-cell comfort foam is unaffected by temperature, altitude, or moisture
- Ops-Core Worm-Dial adjustable fitband and replaceable front, nape, and side pads quickly detaches to allow convenient donning and doffing of COMMs headsets with headbands
- Integrated Ops-Core Head-Loc retention system gives the helmet 4x more stability than the standard issue ACH helmet suspension and retention products
- Size: Medium, Large, X-Large, XX-Large
- Color: Black, Green, Urban Tan, MARPAT, MultiCam®
The Ops-Core FAST Carbon helmet is designed with structural integrity to comfortably support binocular style NVGs without the use of counterweights. It is ideal for recee and water operations, fast roping, and military training.
- Lightweight and extremely durable Carbon Fiber shell
- Identical components to the FAST Ballistic High Cut version except for the shell
- Vent holes for increased ventilation and water drainage
- Now available with vented OPS-CORE Lux Liner.
- Sizes: Medium, Large, X-Large
- Color: Black, Green, Urban Tan, MARPAT, MultiCam®
- The Base Jump Helmet is the same design as FAST Ballistic and Carbon Helmets, but with a polycarbonate shell and molded front NVG mount
- Used for training operations, search and rescue, and outdoor activities
- Offers all the benefits and unique features of the FAST helmets at a lower cost
- Available in two versions: Military and Sport, with over-the chin and under-the-chin chinstraps respectively
- Size: Small/Medium, Medium/Large, Large/X-Large
- Color: Black, Green, MARPAT, MultiCam®, Urban Tan, Red (Sport Version Only)
The Ops-Core Sentry XP provides the same level of protection head coverage as the U.S. Army ACH/ECH with improved interoperability between communication headsets, visors and accessories for mandible protection. It also provides better hearing localization than the ACH with a modified ear area shape; and is compatible with the Ops-Core RAC headset and other in-ear communication devices.
- Innovative hybrid composite design featuring best-in-class materials and game changing processing techniques that weigh 1/2 lbs. less than the ACH while meeting all ballistic fragmentation performance requirements of the U.S. Army's CO/PD-0504 2007 specification
- An Ops-Core Worm-Dial adjustable fit band with replaceable front, nape and side pads quickly and easily detach to allow convenient donning/doffing of communications headsets with headbands, while being more compact.
- Highly compatible with accessories and third party components, the Ops-Core Skeleton Shroud and ACR's allow users to attach various accessories and third party components.
- Size: Medium, Large, X-Large, XX-Large
- Color: Black, Green, Desert MARPAT, MultiCam®, Urban Tan