Maintenance Repair and Operations Equipment

The Air National Guard needed a rapid feeding system to support its mission in times of emergencies. They ruled out existing mobile field kitchens with open-flame burners that cause extreme heat, noise and potential carbon monoxide exposure.

Babington employed advanced closed combustion technology with ultra-efficient heat change and appliance manufacturing to create a highly mobile system designed to provide emergency feeding to military personnel, first responders and survivors.

FEATURES:

• Reduced power and fuel consumption: We improved overall efficiency to squeeze the most energy from every drop of fuel. The entire system uses 60% less fuel than comparable electric kitchens.
• Improved safety, reduced heat & noise: Closed heat exchangers result in a cooler, safer and more productive workplace.
• Improved setup time: The DRMKT can be deployed in less than 30 minutes. With two serving lines, the DRMKT can feed up to 1,000 meals every hour.

The Field Sanitation Unit (FSU) represents the most advanced field feeding sanitation equipment – simply turn on the on/off switch and the single thermostatically controlled Airtronic burner quickly heats, and automatically maintains three 42-gallon sinks (wash, rinse and sanitize) within prescribed temperatures

FEATURES:

• Operates smoke (and other noxious fumes) and odor free. The exhaust from the Airtronic burner in the FSU is smokeless, odor-fee and contains less that 5 parts per million (ppm) Carbon Monoxide (CO), well below the Occupational Safety and Hazard Association (OSHA) limit of 50 ppm of CO to be discharged into a closed room.
• Operates in any weather condition or harsh environment
• Meets NSF Standards
• Highest quality stainless steel construction
• Height adjustable
• Made in the USA

The Powered Multi-fuel Burner (PMB) is the world's safest and most efficient liquid fuel burner available. Originally designed to replace the outdated gasoline M2 burner, the Powered Multi-fuel Burner consists of the Airtronic burner and a heating sled that offers the utmost in cooking versatility. The one-man portable cooker accommodates a mini-griddle, a 15-gallon stockpot and small modular oven accessory pack.

FEATURES:

• Operates without smoke, odor or carbon monoxide from start-up to shutdown
• Low power consumption
• Operating Range from -65°F to +140°F
• Lightweight and compact design
• Burner primary control with flame detection shut-down
• Designed to satisfy the highest safety standards established by Underwriter Laboratories, and the European DIN regulations.

The Tray Ration Heater (TRH) used in the Tray Ration Heating System, and powered by the clean-burning Babington Airtronic Burner, defines the flagship of the Babington line of field feeding equipment.For 20 years the TRHS continues to be the backbone of the Army, Marine Corps and Air Force's rapid deployment field feeding programs. A fully mobile and HMMWV compatible system, with heat-on-the-move capability, the TRHS revolutionized military feeding by virtually eliminating long train subsistence logistics. The TRHS supports 250 people per hour and served more than 150 million meals worldwide throughout combat, disaster relief, peacekeeping and training operations.

FEATURES:

• Only DoD approved heating system on the move
• Each tray pack contains either 9 or 18 portions of entrée, starch, vegetable or dessert item.
• Holds up to 24 Tray Packs or any combination of tray packs and #10 cans.
• Ratchet Straps:
  • 5-foot, 3 each
  • 14-foot, 1 each
  • 16-foot, 1 each

At the heart of all Babington appliances is the Airtronic Burner, the world's cleanest and most energy-efficient distillate fuel burner (JP-8, diesel, kerosene) produces no smoke, no odor and no carbon monoxide. The Babington Airtronic Burner made single-fuel-on-the-battlefield real when it was adopted as the multi-fuel heat source for the first ever heat-on-the-move field feeding systems in 1995. The award-winning Airtronic has since generated heat for million meals worldwide. It utilizes a unique air-atomization technology that leads to near-perfect combustion can withstand the diverse and rugged environments of the US military.

Babington Technology field feeding and kitchen systems are the ideal solution for mobile food preparation and sanitation for military, disaster relief, and humanitarian operations. The systems are modular and scalable to meet any need or requirement.

FEATURES:

• Single Pallet Expeditionary Kitchen: A complete field kitchen that ships on a single 463L Skid and supports 500 people using UGR H&S rations.
• Tray Ration Heating System: The entire system mounts on a HUMVEE and can be operated by the driver and one trained food service specialist.

The latest in field-feeding innovation – the closed combustion Containerized Kitchen Enhanced (CK-E) that completely eliminates carbon monoxide exposure, dramatically reduces interior heat and fuel consumption to improve Warfighter safety and meet operational energy requirements. For over 25 years, Babington has been providing heat-on-the-move food service equipment that meets and exceeds the U.S. Military's mandates for efficiency, reliability and safety. The CK-e MECC enhances the capabilities or previous containerized kitchens with noted improvements.

FEATURES:

• All appliances are heated by Airtronic burners in closed combustion heat exchangers which eliminates noise and heat contamination while also funneling all combustion exhaust outside the kitchen.
• All appliances are insulated and thermostatically controlled, making them fuel-efficient and safe to use
• Appliances can be removed for small unit support in off-grid deployments
• Modular appliances are stackable and use a storage cabinet base, universal heating module, interchangeable cooktop module and removable exhaust hood

Professional Grade Temporary Roadway and Military Deployment System. I-Trac is a state-of-the-art modular infrastructure system that enables vehicular traffic over inhospitable or unsafe ground. I-Trac features a patented interlocking design that creates a contiguous surface capable of carrying extreme loads over virtually all ground conditions. I-Trac can be deployed as temporary roadway, helipad, or tarmac. The advantage that I-Trac offers in comparison to alternative products is its extreme strength to weight ratio. Each panel weighs only 38 pounds and is manually deployable. Installation is quick and easy, requiring no special skills or equipment.

FEATURES:

• Panel Size: 47.5 x 36.3 x 2.1' (L x W x H - bowtie shaped)
• Panel Area: 8.6 Sq Ft
• Panel Weight: 38 lbs
• High-Impact Polypropylene with UV Inhibitors
• Load Capacity: 86,400 lbs/Sq Ft (600 psi)*
• Fire Ratings: UL94HB, ASTM 2859

Supa-Trac is uniquely durable yet lightweight, making it the ideal decking solution for events, tents, or anywhere that heavy foot traffic and equipment will travel. Supa-Trac can support the weight of forklifts with pneumatic tires, light trucks, and vehicular traffic. Panels allow light, air, and water to reach the turf, keeping grass alive while protecting turf from being trampled by pedestrians or vehicles. Supa-Trac is suitable for natural and synthetic turf, indoors or out. Supa-Trac is the most widely recognized design for temporary coverage solutions from pedestrian access to car parking, military shelters, and helipads. Supa-Trac capabilities have been extensively proven worldwide.

FEATURES:

• Panel Size: 38.0 x 11.0 x 1.4' (L x W x H)
• Panel Area: 2.26 Sq Ft
• Panel Weight: 4.4 lbs
• High-Impact Polypropylene with UV Inhibitors
• Load Capacity: 36,000 lbs/ Sq Ft (250 psi)
• Fire Ratings: UL94HB, ASTM 2859

Supa-Trac X-Press is the ultimate lightweight pedestrian decking system. Sharing the traditional Supa-Trac design, it conforms to almost all ground types and conditions, yet it is thinner and has a lighter panel weight. At only 3.3 pounds per panel, this portable flooring product is easy to handle and requires no tools for installation making it among the fastest on the market to install and remove. Supa-Trac X-Press can be laid over any shape and area, and its durability makes it the ideal temporary flooring solution for exhibitions, access routes, and pathways. ADA-compliant edging ramps are also available to reduce the risk of tripping hazards.

FEATURES:

• Panel Size: 39.0 x 11.3 x 1.1' (L x W x H)
• Panel Area: 2.30 Sq Ft
• Panel Weight: 3.3 lbs
• High-Impact Polypropylene with UV Inhibitors
• Load Capacity: 36,000 lbs / Sq Ft (250 psi)
• Fire Ratings: UL94HB, ASTM 2859

SERVICES:

• Site and equipment evaluations
• Preventative maintenance contracts
• Available for all types of equipment and facilities
• Interior and exterior building maintenance
• Improves efficiency while lowering overall costs
• Mechanical, electrical and plumbing systems
• DDC, PLC and other control systems

SERVICES:

• Supply and install or install customer procured equipment
• Turnkey installation including coordination with OEM and end-user
• UPS backup systems and generators
• LED lighting, HVAC and fuel systems
• Testing equipment and wash rack systems

Services:

• Establish customer requirements
• SOW and specification development
• Site survey
• System design
• Coordination with NAVFAC/USACE
• Contract vehicle options
• Utility coordination and connection
• Equipment installation
• Testing and commissioning
• Warranty and on-site customer support

Step up to the gold standard in 3D printing with genuine SLA. The ProJet 6000 offers all the benefits of SLA in a smaller footprint, so you can print with fine feature detail in a wide choice of performance-engineered materials that match or exceed traditional plastic properties.

FEATURES:

• Flexible Throughput: With flexible build volume options and easily swappable material delivery modules, print exactly what you need, exactly when you need it.
• Accurate, Precise Detail: Print parts with crisply defined features and precise geometries, so you can evaluate physical models of design concepts in their nearly finished state.
• Exceptional Part Quality: Whether you need the clearest clear, the smoothest surfaces, or the best dimensional stability over your entire part, getting the exceptional part quality of 3D Systems SLA is more economical than ever.