Filters
Military Clothing, Equipment, and Other OCIE Items
$0.00
- Shatterproof Interchangeable Selenite™ Lenses
- Super-Tough Triloid Nylon Frame
- Foil™ Anti-Fog Lenses
- RX Ready
- High-wrap Frames
- UVA/UVB Light Blocking
- ANSI Z87.1+ Impact (High-Velocity and High-Mass)
- MIL-PRF-32432A Safety Standard
$0.00
- Shatterproof Interchangeable Selenite™ Lenses
- Super-Tough Triloid Nylon Frame
- Foil™ Anti-Fog Lenses
- T-Peg Strap
- High-wrap Frames
- T-Shell™ Scratch Resistance
- Dual-Injection Rubber Temples and Nose Pads
- Removable Facial Cavity™ Seal
- 100% UVA/UVB Protection
- ANSI Z87.1+ Impact (High-Velocity and High-Mass)
- MIL-PRF-32432A Safety Standards
$0.00
All the features of the rapid-access trauma bag with the addition of reinforced tie-in points for connecting to a parachute harness. The Rapid Access Trauma System (RATS) pack is a frontline medic bag whose every detail is focused on quick, one-handed access to organized medical supplies. There are multiple trauma shears and tourniquet holders throughout and large reinforced handles for hanging the pack on branches or inside of helicopters. Inside the RATS are four removable pockets with clear vinyl windows and two IV bag pockets.
- 500D CORDURA® fabric and YKK® zippers
- Reinforced 1000D CORDURA® fabric in critical areas
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Jump-rated Type 7 webbing on all jump connections
- Tex 138 thread on all Jump web for reinforcement and higher break strength
- Dual point release system to attach to jump harness
- Reinforced tie-in loops
- D-rings for securing the toggle zippers
- Lowering line attachment points
- Back panel stores a closed-cell foam pad
- Internal trash pocket to keep track of items used
- Two internal sleeves for splints and long items
- Two 150 cu-in front pockets for blowout kits
- Top lid features internal bandage and gauze loops
- 300 cu-in zippered bottom pocket
- Autolock buckles prevent slippage
- PALS webbing accommodates MOLLE accessories
- Redirect waist belt
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 7 lbs (3.2 kg)
- Volume: 1400 cu-in (23 L)
$0.00
For the mission-focused Jump Mountain Ruck, we've reinforced critical areas and added airborne attachment points to our traditional Mountain Ruck. This pack combines the desirable shape of the original MYSTERY RANCH Mountain Ruck with quick rigging, airborne attachment points. Features include lowering line attachment points, zipper retainers, and leg straps.
- 500D CORDURA® fabric and YKK® zippers
- Reinforced 1000D CORDURA® fabric in critical areas
- NICE Frame for comfort and stability under the heaviest loads
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Jump-rated Type 7 webbing on all jump connections
- Tex 138 thread on all Jump web for reinforcement and higher break strength
- Dual point release system to attach to jump harness
- Reinforced tie-in loops
- D-rings for securing the toggle zippers
- Lowering line attachment points
- Rip-Zip pockets give rapid access to the essential items
- Two internal hydration sleeves
- PALS webbing accommodates MOLLE accessories
- Autolock buckles prevent slippage
- MOLLE on waist belt and exterior for attaching accessories
- Redirect waist belt
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 9.4 lbs (4.3 kg)
- Volume: 4500 cu-in (74 L)
$0.00
Based on the NICE BVS frame, the JUMP OVERLOAD pack is unique for its ability to change from Patrol pack to weapons carry to load hauler. In default configuration, it is a fast access, 3,000 cu in Patrol pack. When missions change, it securely transports a sniper system or M240G, even a 60mm mortar tube all set up with bipod, trigger and M8 baseplate. When it's time for resupply or you have to haul large, awkward items, simply expand the cargo shelf and you have massive load-carrying capability.
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Jump-rated Type 7 webbing on all jump connections
- Dual point release system to attach to jump harness
- Reinforced tie-in loops
- D-rings for securing the toggle zippers
- Lowering line attachment points
- Overload feature allows for securing of a rifle or mortar between the frame and the bag with color
- coordinated buckles on weapon compression strap
- Grippy, high-abrasion neoprene on the Overload™ feature to stabilize rifle or mortar
- MOLLE on interior body panel for attaching accessories
- Port at top of body panel opens from either side for antennae, cables, and/or hydration
- MOLLE on waist belt and exterior for attaching accessories
- Redirect waist belt
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 8.3 lbs (3.8 kg)
- Volume: 3000 cu-in (50 L)
$0.00
The KOMODO DRAGON is a slightly larger version of our 3 Day Assault for extended time in the field. The KOMODO DRAGON uses the Futura yoke to adjust to different torso lengths and accommodate the extra girth of armor. Inside, it has a MOLLE panel for radio mounts plus detail pockets and hydration sleeves. The waist belt stows away when not in use.
- 500D CORDURA® fabric and YKK® zippers
- 3-ZIP design for quick access
- Three rows of MOLLE on front panels
- VELCRO® on lid for identification and patches
- Radio inputs, outputs and antennas route easily through the three urethane coated zippered ports
- Water bottle pockets keep hydration handy
- Double-layered bottom for long-haul durability
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Waist belt stows away when not in use
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 4.8 lbs (2.2 kg)
- Volume: 2000 cu-in (33 L)
$0.00
The OVERLOAD features our quick-access 3-ZIP design and the ability to secure sniper and crew-served weapons or Pelican cases between the pack and frame without decreasing capacity for mission essentials or sustainment gear.
- 500D CORDURA® fabric and YKK® zippers
- 3-ZIP design for quick access
- NICE Frame for comfort and stability under the heaviest loads
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Overload feature allows for securing of a rifle or mortar between the frame and the bag with color
- coordinated buckles on weapon compression strap
- Grippy, high-abrasion neoprene on the Overload™ feature to stabilize rifle or mortar
- Two internal sleeves each accommodate water bladders up to 3L each
- MOLLE on interior body panel for attaching accessories
- Port at top of body panel opens from either side for antennae, cables, and/or hydration
- Two zippered pockets on lid for keeping small items accessible
- Velcro on lid for identification and patches
- MOLLE on waist belt and exterior for attaching accessories
- 2' waist belt
- Side water bottle pockets
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 7.9 lbs (3.6 kg)
- Volume: 3000 cu-in (50 L)
$0.00
- ALS® (Automatic Locking System) secures weapon once holstered; simple straight up draw once release is deactivated
- Open-top design without SLS for quick retrieval of weapon
- Hood Guard is standard; optional ALS Guard available
- SafariLaminate™ thermal-molded construction protects handgun and sights
- Adjustable vertical leg strap with quick release detachable leg harness
- Standard double leg strap and leg shroud with mounting holes for optional accessories
- Suede lined to protect handgun's finish
- Leg shroud features silicon strap for non-slip traction
- Holster is optimized for MOLLE vest use (OMV) with lower center of gravity than most other Safariland tactical holsters for less leverage on vest
$0.00
- Designed to accommodate the BERETTA M9/92F or Sig P226 pistol with or without a light or LAM unit
- Ambidextrous body design
- Hood Guard is standard; optional Sentry available
- Features the SLS (Self Locking System) rotating hood system
- SLS allows for a smoother, single-motion draw and greater protection against attempted weapon takeaways
- Thermal-molded SafariLaminate™ construction protects handgun and sights
- Standard double leg strap and leg shroud with mounting holes for optional accessories
$0.00
- Made of 1.75" webbing
- Outside wrap hook and loop adjustment
- Heavy duty forged Cobra Buckle
- Heavy duty forged triangular rescue fittingsewn in with heavy duty 3 cord
- 1" webbing with hook backing for rescuefitting keeper
- Weight: 0.5 lbs
$0.00
Heavily insulated with 600 grams of
Thinsulate™, this all full-grain leather
steel toe boot offers ultimate waterproof
protection and superior slip resistance
in icy conditions through the use of the
Vibram® 360° FIRE & ICE™ outsole made
of a special rubber compound that will
not harden in cold temperatures.
$0.00
Heavily insulated with 600 grams of
Thinsulate™, this all full-grain leather
boot offers ultimate waterproof
protection and superior slip resistance
in icy conditions through the use of the
Vibram® 360° FIRE & ICE™ outsole made
of a special rubber compound that will
not harden in cold temperatures.
$0.00
The C793 is the latest addition to
Belleville's Air Force and Army Flight
Certified boots. With its lightweight
upper pattern and Vibram® IBEX
outsole, this boot has a more modern,
more agressive look. With full-grain
cowhide leather and waterproof
GORE-TEX fabric, this boot provides both
comfort and durability.
$0.00
An ideal option for Air Force Maintainers
working in hot weather conditions, the 6"
C315 ST was designed for wear with the
USAF dark navy blue uniform shorts and
OCP uniform where authorized. This
ultralight, highly breathable boot is built
on an athletic strobel-stitch
construction to feel like an athletic
shoe, but also contains a ASTM certified
steel toe for added protection on the
flight line, in hangars and dock areas.
$0.00
The ESS Crossblade™ Eyeshield features advanced ClearZone™ Anti-fog coatings plus two different sized lens and nosepiece options to allow for customizable modular fit. Users can choose between a Standard lens and nosepiece or NARO lens and NARO nosepiece. With the modular system, the Crossblade™ can be set specifically to fit the end users facial structure. Modular Fit equals performance and comfort.
The Crossblade's Tri-Tech Fit™ frame features a snug fit with zero pressure points. Advanced ClearZone™ Dual Flow Coated lenses are engineered to eliminate fog inside and prevent scratches outside. Distortion-free ESSOPTICS™ keep your vision razor sharp and the DedBolt™ Lens Lock pivot allows for rapid lens exchanges.
BALLISTIC PROTECTION STANDARDS
The Crossbow® Eyeshield exceeds U.S. MIL Spec MIL-PRF-32432A, ANSI Z87.1-2020, OSHA & CE EN166
FEATURES:
The Crossblade's Tri-Tech Fit™ frame features a snug fit with zero pressure points. Advanced ClearZone™ Dual Flow Coated lenses are engineered to eliminate fog inside and prevent scratches outside. Distortion-free ESSOPTICS™ keep your vision razor sharp and the DedBolt™ Lens Lock pivot allows for rapid lens exchanges.
BALLISTIC PROTECTION STANDARDS
The Crossbow® Eyeshield exceeds U.S. MIL Spec MIL-PRF-32432A, ANSI Z87.1-2020, OSHA & CE EN166
FEATURES:
- APEL approved
- U.S. Army UPLC Rx compatible
- Anti-fog/anti-scratch lens coatings
- Universal fit Tri-Tech™ frame
- 2.4mm high-impact polycarbonate lens
$0.00
ESS Laser Protective Lenses (LPL) provide broad protection against visible and non-visible laser threats and industry-leading ballistic protection. Lasers can cause severe retina damage. ESS LPL lenses are specifically formulated to maximize protection against direct, reflected, and scattered laser beams and radiation. In general, laser-protective lenses block a specific wavelength or set of wavelengths of light that can be either visible or invisible to the naked eye. The amount of strength that LPL's block those wavelengths is called the Optical Density (OD). ESS LPLs are designed to allow the most amount of visible light transmittance (high VLT) to pass through the lenses for operational versatility in all environments while maintaining the greatest OD available to provide laser protection.
Features: Interchangeable Polycarbonate Lenses, Ballistic Protection, Anti-Fog/Anti-Scratch Lens Coatings, Cross-Compatibility with all ESS Cross-Series Eyeshields. 100% UVA/UVB Protection, ANSI Z87.1-2020, U.S. Federal OSHA, MIL-Spec MIL-PRF-32432A
Features: Interchangeable Polycarbonate Lenses, Ballistic Protection, Anti-Fog/Anti-Scratch Lens Coatings, Cross-Compatibility with all ESS Cross-Series Eyeshields. 100% UVA/UVB Protection, ANSI Z87.1-2020, U.S. Federal OSHA, MIL-Spec MIL-PRF-32432A
$0.00
Don't let fogging jeopardize the safety of your mission. The ESS TurboFanTM Series provides the best weapon available for keeping your vision clear during situations where perspiration or temperatures are extreme. With a built-in fan that literally blows humidity out of the goggle at 13,000 rpm, no technology is more effective at dramatically reducing lens fogging.
Like the regular ESS Profile NVGTM goggle, the Profile TurboFanTM is a compact system compatible with night vision systems and helmets. The durable closed-cell face OpFoamTM face padding is easy to clean and ideal for extended comfort in all weather conditions.
BALLISTIC PROTECTION STANDARDS
The Profile NVGTM Goggle exceeds U.S. MIL SPEC MIL-PRF-32432A, ANSI Z87.1 – 2020, OSHA & CE EN166
FEATURES:
Like the regular ESS Profile NVGTM goggle, the Profile TurboFanTM is a compact system compatible with night vision systems and helmets. The durable closed-cell face OpFoamTM face padding is easy to clean and ideal for extended comfort in all weather conditions.
BALLISTIC PROTECTION STANDARDS
The Profile NVGTM Goggle exceeds U.S. MIL SPEC MIL-PRF-32432A, ANSI Z87.1 – 2020, OSHA & CE EN166
FEATURES:
- Ventilation & filtration system with high-speed fan technology
- ESSOPTICS™ provides distortion-free optical precision
- ADVANCED CLEARZONETM anti-Fog & anti-scratch lens FlowCoating
- Extra-thick 2.8mm Ballistic Polycarbonate lens
- EASY ON/OFF with our patented outrigger system positioning strap for optimal helmet compatibility
$0.00
ESS Profile Pivot™ TW Team Wendy kit provides a simple and adjustable solution for attaching ESS Profile™ Series military goggles to any Team Wendy helmet that has been equipped with ESS mounting posts. When seconds count, users will benefit from the advancements offered by the Profile Pivot™ goggle mount: easy donning and doffing, multiple secure stowage options, and rapid strap adjustment.
The Profile Pivot™ TW replaces the Profile NVG's full elastic strap with two pivoting adjustable side-straps. The Profile Pivot system is engineered to be rapidly affixed in the field while wearing helmet and gloves. Once mounted to its helmet-posts, the secured Profile™ Pivot goggle can be repositioned or removed as needed.
BALLISTIC PROTECTION STANDARDS
This Profile Pivot goggle is compliant with U.S. MIL SPEC MIL-PRF-32432A, ANSI Z87.1-2020, CE EN 166 and U.S. Federal OSHA
FEATURES:
The Profile Pivot™ TW replaces the Profile NVG's full elastic strap with two pivoting adjustable side-straps. The Profile Pivot system is engineered to be rapidly affixed in the field while wearing helmet and gloves. Once mounted to its helmet-posts, the secured Profile™ Pivot goggle can be repositioned or removed as needed.
BALLISTIC PROTECTION STANDARDS
This Profile Pivot goggle is compliant with U.S. MIL SPEC MIL-PRF-32432A, ANSI Z87.1-2020, CE EN 166 and U.S. Federal OSHA
FEATURES:
- Attaches to Team Wendy EXFIL SAR Tactical helmets
- Allows for secure repositioning of goggle
- Easy on/off tabs for rapid donning/doffing
- Patented SpeedclipsTM permit rapid strap tension adjustment
- Patented OutriggersTM position strap for optimal helmet compatibility
- Kit available to retrofit standard strap of any ProfileTM goggle
- Multiple fore & aft mounting positions possible on rail
$0.00
ESS Influx Pivot™ kits provide a simple and adjustable solution for attaching ESS Influx™ Series military goggles to any Ops Core® or other ballistic helmets equipped with the Ops Core® ARC™ Rail System. When seconds count, users will benefit from the advancements offered by the Influx Pivot™ goggle mount: easy donning and doffing, multiple secure stowage options, and rapid strap adjustment.
The Influx Pivot™ replaces the Influx standard full elastic strap with two pivoting adjustable side-straps. The Influx Pivot system is engineered to be rapidly-affixed in the field while wearing helmet and gloves. Once mounted to its helmet-posts, the secured ESS Influx Pivot™ goggle can be repositioned or removed as needed.
By virtually eliminating lens fogging. The ESS Influx™ goggle allows users to maintain full situational awareness in dynamic environments. As part of the goggle's patented Adjustable Ventilation System™ (AVS™), the Influx RotoClip™ silently pivots the position of the lens inside the goggle frame: choose either a dust-free, fully-sealed mode, or a fog-free, open-ventilation mode.
BALLISTIC PROTECTION STANDARDS
The Influx (TM) Goggle exceeds U.S. MIL SPEC MIL-PRF-32432A, ANSI Z87.1 – 2020, OSHA & CE EN166
FEATURES:
The Influx Pivot™ replaces the Influx standard full elastic strap with two pivoting adjustable side-straps. The Influx Pivot system is engineered to be rapidly-affixed in the field while wearing helmet and gloves. Once mounted to its helmet-posts, the secured ESS Influx Pivot™ goggle can be repositioned or removed as needed.
By virtually eliminating lens fogging. The ESS Influx™ goggle allows users to maintain full situational awareness in dynamic environments. As part of the goggle's patented Adjustable Ventilation System™ (AVS™), the Influx RotoClip™ silently pivots the position of the lens inside the goggle frame: choose either a dust-free, fully-sealed mode, or a fog-free, open-ventilation mode.
BALLISTIC PROTECTION STANDARDS
The Influx (TM) Goggle exceeds U.S. MIL SPEC MIL-PRF-32432A, ANSI Z87.1 – 2020, OSHA & CE EN166
FEATURES:
- Quick adjust strap
- U.S. Army UPLC Rx compatible
- Anti-fog/anti-scratch lens coatings
- Adjustable Ventilation System™ (AVS™) frame
- 3mm high-impact polycarbonate lens
$0.00
The ESSFirePro-1977S Series includes the most advanced low-profile wildland fire and rescue goggles on the market. The compact frame design prevents helmet interference while increasing peripheral vision. The FirePro-1977 EX model features the patented Snap-On/Snap-OffTM helmet mounting system, which allows the goggles to be stored in a pocket when not in use, then deployed in seconds. The patented ESS Speed-Clip strap system makes adjusting the FirePro straps quick and easy, even with gloves on. The extra-thick, 2.8mm high-impact lenses provide wide peripheral vision and distortion-free optics. These lenses also feature ESS' advanced ClearZone Flow Coat lens treatments, which provide an optimal combination of anti-scratch coatings on the outside of the lens and anti-fog coatings on the inside.
BALLISTIC PROTECTION STANDARDS:
The ESS Firepro-1977TM Goggle exceeds NFPA 1977-2018 Edition, ANSI Z87.1-2020, U.S. Federal OSHA, CE
BALLISTIC PROTECTION STANDARDS:
The ESS Firepro-1977TM Goggle exceeds NFPA 1977-2018 Edition, ANSI Z87.1-2020, U.S. Federal OSHA, CE
$0.00
ESS ballistic sunglasses come in a variety of styles, colors, lenses, and kit configurations. All our sunglasses meet or exceed U.S. MIL SPEC MIL-PRF-31013 (Clause 3.5.1.1), ANSI Z87.1-2020, OSHA & CE EN166 except polarized eye pro which meets ANSI Z87.1-2020 (Impact) & OSHA.
MODELS:
5B – Fixed lens sunglass with ESS TOUGHZONETM Anti-scratch coating, 2.2mm polycarbonate lenses, maximum wrap for lateral protection and peripheral view and broad temple coverage for optimal side protection. Small to medium fit.
CDI/CDI Max – Interchangeable 2.2/2.4mm polycarbonate lenses with ESS TOUGHZONETM Anti-scratch coating, RX insert compatible, maximum wrap for lateral protection and peripheral view and non-slip proprietary rubber sheathing for secure fit. CDI – small to medium fit. CDI Max – medium to large fit.
CROWBAR - Interchangeable 2.2mm polycarbonate lenses with ESS TOUGHZONETM Anti-scratch coating, frameless bottom provides increased field of view, CrowbarTM Lens GateTM for rapid lens exchange, thin temple arms compatible with hats, helmets, hearing pro and comms gear.
CREDENCE – Fixed lens sunglass with ESS TOUGHZONETM Anti-scratch coating, 2.2mm polycarbonate lenses, maximum wrap for lateral protection and peripheral view and broad temple coverage for optimal side protection. Medium to large fit.
ROLLBAR –Interchangeable 2.2mm polycarbonate lenses with ESS TOUGHZONETM Anti-scratch coating, maximum wrap for lateral protection and peripheral view, RollbarTM lens gateTM for rapid lens exchange, thin temple arms compatible with hats, helmets, hearing pro and comms gear. Medium to large fit.
MODELS:
5B – Fixed lens sunglass with ESS TOUGHZONETM Anti-scratch coating, 2.2mm polycarbonate lenses, maximum wrap for lateral protection and peripheral view and broad temple coverage for optimal side protection. Small to medium fit.
CDI/CDI Max – Interchangeable 2.2/2.4mm polycarbonate lenses with ESS TOUGHZONETM Anti-scratch coating, RX insert compatible, maximum wrap for lateral protection and peripheral view and non-slip proprietary rubber sheathing for secure fit. CDI – small to medium fit. CDI Max – medium to large fit.
CROWBAR - Interchangeable 2.2mm polycarbonate lenses with ESS TOUGHZONETM Anti-scratch coating, frameless bottom provides increased field of view, CrowbarTM Lens GateTM for rapid lens exchange, thin temple arms compatible with hats, helmets, hearing pro and comms gear.
CREDENCE – Fixed lens sunglass with ESS TOUGHZONETM Anti-scratch coating, 2.2mm polycarbonate lenses, maximum wrap for lateral protection and peripheral view and broad temple coverage for optimal side protection. Medium to large fit.
ROLLBAR –Interchangeable 2.2mm polycarbonate lenses with ESS TOUGHZONETM Anti-scratch coating, maximum wrap for lateral protection and peripheral view, RollbarTM lens gateTM for rapid lens exchange, thin temple arms compatible with hats, helmets, hearing pro and comms gear. Medium to large fit.
Products advertised for marketing purposes on this site may contain chemicals known to the State of California to cause cancer or reproductive harm. See –
Toll-Free: 866.936.3890