Military Clothing, Equipment, and Other OCIE Items
- Double Layered
- Firmer grain/external texture on the grain of the leather
- Softer texture on internal side
The Fast Rope Mitt (FRM) is designed to be a minimalist, lightweight glove that can easily be transported on the Professional User and available for Fast Rope Insertion. The FRM can be used with or without the FirstSpear - Operator Glove (OG) and is constructed using the best in abrasion resistant and heat mitigating fiber materials.
It's cut and assembled to fold flat for transport in a typical Uniform Pocket; the FRM is low bulk and supports Short, Medium or Extended Fast Rope Insertions up to 90 Feet (27.4 Meters). Additionally, the FRM has an advanced two finger pattern that allows the User to rapidly expose his trigger finger to engage a firearm, this method is far faster than actually taking off a glove during extreme situations, the FRM can be pulled partially off and retained around the wrist by the second elastic strap across the back until time has become available to secure in through the reinforced retention loop at the cuff.
This glove is 100% Berry Compliant featuring all American "roper" cow leather and ultra-high performance Kovenex providing greatly enhanced cut, tear, and thermal resistance for Fast Rope Insertions. It's ultra soft on the hand and double layered in key points with a firmer grain and texture on the exterior of the palm. Reinforced button holes allow for quick and easy carabiner or snap hook attachment.
- Shatterproof Interchangeable Selenite™ Lenses
- Super-Tough Triloid Nylon Frame
- Foil™ Anti-Fog Lenses
- RX Ready
- High-wrap Frames
- UVA/UVB Light Blocking
- ANSI Z87.1+ Impact (High-Velocity and High-Mass)
- MIL-PRF-32432A Safety Standard
- Shatterproof Interchangeable Selenite™ Lenses
- Super-Tough Triloid Nylon Frame
- Foil™ Anti-Fog Lenses
- T-Peg Strap
- High-wrap Frames
- T-Shell™ Scratch Resistance
- Dual-Injection Rubber Temples and Nose Pads
- Removable Facial Cavity™ Seal
- 100% UVA/UVB Protection
- ANSI Z87.1+ Impact (High-Velocity and High-Mass)
- MIL-PRF-32432A Safety Standards
- All the features of the Model 6004
- Hood Guard is standard
- Features the SLS (Self Locking System) rotating hood
- SLS allows for a smoother, single-motion draw and greater protection against attempted weapon take-aways
- Thermal-molded SafariLaminate™ construction protects handgun and sights
- Adjustable vertical leg strap with quick release detachable leg harness
- Offered for weapons with and without rail
- mounted lights
The VLAK was designed to address mass casualty events and medical resupply storage in a vehicle. It can be slung over a head rest or attached via MOLLE. The rip-zip design gives you quick, one-handed access to the contents.
- Weight: 12.3 oz (349 g)
- Volume: 430 cu-in (7 L)
- Color: MultiCam®, Coyote
FEATURES:
- Multiple wiring channels
- Antenna routing area
- Capable of carrying 117 radio
- Hydration storage
- Removable shoulders
- Fixed beavertail
- Administration internal pouch 70 or 100 oz. Hydration Bladder
- Removable spacer mesh back panel that allows ASP007 to be worn as a standard pack or attached to vest/plate carrier
FEATURES:
- Weight: 21.9 lbs.
- NIJ 0108.01 Level 3 Compliant Ð 7.62 x 51 mm, 149 gr, FMJ NATO Ball (M80 Ball)
- Forearm Pad
- Carry Bag
- Fixed Handle
- Special Threat Testing:
- 7.62 x 39 MSC 123 gr
A modular cinch strap designed to reroute the shoulder pads of a pack down the front of your IBA, MTV or other body armor to ease chafe, bleeding and nerve damage. Standard USMC Issue.
- Color: MultiCam®, Coyote
The Body Armor Support Equipment (BASE) is our solution to help take the weight of armor and kit off the shoulders. Initially developed for plate carriers, it works well with nearly any armor system. BASE is adjustable to most torsos and effectively transfers the weight of the armor and kit from the shoulders to the hips and legs. Installation is simple and quick. Just attach the BASE panel to the MOLLE on your plate carrier, and then adjust the frame to fit your torso.
The largest of the Operator Pack series packs is the Extended Range Operator Pack. It's large size and extensive list of features make it essential for longer missions. The large main compartment is lined with six additional pockets for organization of smaller items as well as a full length heavy-duty zipper that can allow the pack to be accessed from the top or from the side like a duffle bag. The top of the bag includes a smaller storage pocket for items you need to access quickly with external bungee system to secure lightweight clothing articles. The outside of the pack is covered with modular webbing for attaching additional modular pouches or our smaller Removable Operator Pack. You will also find double padded shoulder straps with load-lifters for comfort and weight distribution, an aluminum and HDPE internal frame for rigidity and an external hydration pocket with covered drinking tube ports. Other features include six compression straps, large waist belt, sternum strap and hidden VS-17 style marker panel for emergency identification.
- All of these features make the Extended Range Operator the only long range pack you will need.
- Total Volume: 3,142 cu in
- Color: ACU, Coyote Brown, MultiCam®, Olive Drab
One of our most popular packs, this classic top-loading design features our Speedzip™ sleeping bag compartment on the bottom and a removable Day Pack lid. Based on the NICE Frame system, this pack can carry 70 pounds in comfort and will stabilize loads surpassing 100 pounds. A side zipper allows quick access to the internal contents of bag.
- 500D CORDURA® fabric and YKK® zippers
- Classic top loading design for easy packing
- NICE Frame for comfort and stability under the heaviest loads
- PALS webbing accommodates MOLLE accessories
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Speedzip™ compartment for quick access to sleeping bag
- Side bottle pockets keep hydration handy
- Removable Daypack Lid with shoulder straps to move further without all sustainment gear
- Vertical back long pockets
- Side zipper access
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 10 lbs (4.5 kg)
- Volume: 6500 cu-in 106 L
The CREWCAB is the Mystery Ranch variable-capacity, do-anything military pack. It can be compressed into a low-profile, 1900 cu-in pack or expanded to 5000 cu-in. It can carry EOD gear, Pelican cases, robots, Load Cells, ammo cans, even casevacs in a pinch.. For additional storage, add the DaypackLid. The CREWCAB excels at carrying weird loads well.
- 500D CORDURA® fabric and YKK® zippers
- NICE Frame for comfort and stability under the heaviest loads
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- MYSTERY RANCH Load Cells are designed to fit perfectly in the CREWCAB
- Compatible with the Daypack Lid which locks on loads that extend above the top of the frame
- Zippered back panel pocket accommodates up to three 100 oz water bladders
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 8 lbs (3.6 kg)
- Volume: 2100 cu-in (35 L)
The 3 Day Assault BVS has room for sustainment gear, ammo, IFAKs and tactical radios. For versatility and mobility, there's nothing better. This pack was designed to be the last word in assault packs. Loaded with features, external MOLLE webbing gives you options to expand, and side compression straps minimize bulk.
- 500D CORDURA® fabric and YKK® zippers
- Bolstered Ventilation and Stability (BVS) system increases stability of the pack over armor
- Three rows of MOLLE on front panels
- Internal sleeves and ports integrate up to three hydration reservoirs
- Zipper port for radio and antennae access
- Radio inputs, outputs and antennas route easily through the three urethane coated zippered ports
- Velcro on lid for identification and patches
- Waist belt stows away when not in use
- Futura Yoke provides rapid adjustment for differing torso lengths
- Weight: 4.6 lbs (2.1 kg)
- Volume: 1800 cu-in (33 L)
The NICE Frame BVS is the core of our solution for serious load-hauling and stability. The frame is made of carbon-fiber/ fiberglass stays with sewn nylon joints that are programmed to flex perfectly with your stride without wasting energy. The frame can be used alone as a freighter or with any of our numerous pack-bags, providing the versatility to handle any load situation. The NICE Frame BVS also includes our removable Bolsters which lock down over your torso plate with minimum pressure on your shoulder straps, increasing the pack's stability when worn over armor.
- Foundation of the NICE Frame System
- Can be used alone as a simple freighter or in-conjunction with any of our numerous NICE Pack Bags
- Remarkable load range: 30 - 120 pounds
- Made entirely in the U.S.A.
- Yoke Size: Small, Medium, Large
- Waist Belt: Small, Medium, Large
PADDING OPTIONS
MILSPEC 7 Pad Kit
4D7PadKit RETENTION OPTIONS
Standard X-Harness
Dual Dial BOA® Closure System
Left or Right Dominant Chin Cup SIZE/WEIGHTS:
1.1 lbs./498.9 grams
Dimensions: 8" tall x 6" wide x 3" deep
As a leading supplier of helmet systems for military, law enforcement, search and rescue, and adventure sports, Team Wendy is steadfast in our dedication to the pursuit of improving head protection research, design, and development, bringing more choice, better technology, and reliable customer service to the industry.
*NOTE: The NVG mount/interface required for attaching night vision devices to the EXFIL® LTP helmet is not included. Independently tested to meet all performance requirements of BS EN 1385:2012 standard for whitewater helmets.