Filters
Expeditionary Building Systems
$0.00
The Flood and Area Light is a mission-ready, energy efficient LED light. Comes in a single or double design where customers can choose the beam angle to accommodate a full flood range or a more specified area range.
FEATURES:
FEATURES:
- Marine use rated
- ABS Type Approved
- Rugged construction to handle demanding environments.
- Longer lasting and better quality of light
- Eliminates time-consuming maintenance.
- Multiple beam angles available to suit environment: 14, 25, 44, 57, 66
- Mounting: Surface/Rotatable/Yoke
- Regulatory Approval: Type (salt water) and UL 844, ABS, UL 1598 and UL 8750
- Made in the USA
$0.00
Eliminate time-consuming maintenance by providing longer lasting and better quality of light.
FEATURES
FEATURES
- Rugged construction to handle demanding environments
- Rated for Hazardous Locations: Class 1, Division 2, Groups A, B, C, D
- Mounting: Vessel and flat mount
- Enclosure Type: Octagonal shape for easy installation
- Regulatory Approval: UL 1598A [Outside Type (salt water)] and UL 844 [Wet Location Listed], ABS, UL
- 1598, and UL 8750
- Made in the USA
$0.00
The EOD Power Management Kit (EOD-PMK) provides everything the EOD technician needs to recharge his batteries and power his kit from any source (solar, vehicle, AC Mains, scavenged energy). Built around the industry-leading SPM-622 intelligent power manager, the compact EOD-PMK includes a foldable solar blanket, adapters to charge BB-2590, PRC-148, PRC-152, DeWalt tool, AA, and CR-123 batteries, and cables to power common EOD radios, tools, and detection equipment. The easy-to-use EOD-PMK quickly charges one to three batteries simultaneously, and powers up to five pieces of gear at once, converting all voltages automatically. Often deployed in the EOD Tech vehicle, the single power manager replaces up to 20 different battery chargers and power adapters, for a huge savings in space and clutter.
$0.00
The Special Forces Power Management Kit (SF-PMK) provides everything the Operator needs to recharge all his batteries and power his kit from any source (solar, vehicle, world-wide AA). Built around the industry-leading SPM-622 intelligent power manager, the lightweight SF-PMK includes a lightweight foldable solar blanket, adapters to charge the most commonly used military and commercial batteries (AA to BB-2590), and cables to power PRC-117, PRC-152, Toughbook, USB and cigarette powered devices, as well as many more. The easy-to-use SF-PMK quickly charges from one to three batteries simultaneously, and powers up to five pieces of gear at once, converting all voltages automatically. The SF-PMK provides all the power conversion and charging the operator needs in the field, saving weight, cube, clutter, and complexity.
$0.00
The SoloPack™ Battery is a low-profile, rechargeable lithium ion battery that packs the energy needed for a 12 hour mission. Weighing approximately a pound, the battery is small enough to fit in a magazine pouch. It's the lightest weight MOTS rechargeable military battery currently in its class, has a small form factor and is compatible with existing kit such as NATO ammo pouches.The rugged SoloPack is designed to plug-and-play, offering a high power density to power currently fielded equipment and reducing the weight burden of carrying spare batteries.
KEY FEATURES:DOWNLOAD SPEC SHEET
KEY FEATURES:
- Highest energy density in its class
- Fits inside M4 magazine pouch
- Push button activated state-of-charge display
- Wide operating temperature
- Compatible with existing chargers and devices
- NettWarrior Compatible
- SMBus v1.1 compatible
- Can be recharged while in-flight when connected to the Squad Power Manager™ (SPM) which is certified safe-to-fly
$0.00
- Power: 22W
- Weight (oz): 17
- Open (in): 25' x 13'
- Folded (in): 8.5' x 6.75' x 1.5'
$0.00
- Power: 33W
- Weight (oz): 21
- Open (in): 25' x 14.75'
- Folded (in): 6.5' x 7.25' x 1.75'
$0.00
- Power: PS60W
- Weight (oz): 35
- Open (in): 30.5' x 21.125'
- Folded (in): 10.5' x 7' x 2.5'
$0.00
- Power: 100W
- Weight (oz): 48
- Open (in): 48.25' x 21.25'
- Folded (in): 11' x 11' x 2.5'
$0.00
- Power: 120W
- Weight (lb): 5lb 6oz
- Open (in): 58.5' x 24'
- Folded (in): 12' x 12.5' x 2.25'
$0.00
- Power: 155W
- Weight (lb): 7.7
- Open (in): 55' x 27'
- Folded (in): 27' x 13.5' x 1.5'
$0.00
- Power: 200W
- Weight (lb): 8.6
- Open (in): 54.25' x 33'
- Folded (in): 8.5' x 6.75' x 2.5'
$0.00
- Power: 300W
- Weight (lb): 22
- Open (in): 68' x 38.5'
- Folded (in): 38.5' x 34' x 1.5'
$0.00
Energy generation and distribution in austere environments is a strategic and tactical challenge. CECOM Message DTG 281316Z Feb 19 states 'Temporary power distribution from the 3kW generator load terminals can be accomplished with the 3kW Power Distribution Reel (PN: GEN-2014101TN) manufactured by Genesis J.I.T., distributed by ADS, Inc. and available on GSA Schedule GS-07F-6072P (Schedule 78).
The GEN-2014101TN-2 POWER DISTRIBUTION CABLE REEL has been specifically designed for the 3kW Tactical Quiet Generator. A ruggedized steel cable reel that is per-wired with 50 feet of 12/3 cable, this system is based on a capability gap in small power distribution encountered by Army, Air Force, Navy and Marine Corps units. Configured to meet the needs of the war fighter in any operational environment.
SYSTEM CONFIGURATION:
The GEN-2014101TN-2 POWER DISTRIBUTION CABLE REEL has been specifically designed for the 3kW Tactical Quiet Generator. A ruggedized steel cable reel that is per-wired with 50 feet of 12/3 cable, this system is based on a capability gap in small power distribution encountered by Army, Air Force, Navy and Marine Corps units. Configured to meet the needs of the war fighter in any operational environment.
SYSTEM CONFIGURATION:
- Outlets: 1 dual commercial 120V GFCI 20A/1 dual commercial 120V 20A
- Breaker: Hydraulic magnetic switch/breakers
- Indicators: Panel mounted LED indicator light
- Extension Cable: 50ft SJOOW 12/3
- Connectors: Optional or customer installed
- Reel: Steel, powder coated (desert tan)
- Enclosure: H 6' x D 7' x W 6'
- Reel Dimensions: Diameter 13', Height: 19', Weight: 21 lbs
- Hydraulic breakers are NOT affected by heat or cold
- GFCI adds an additional layer of protection from accidental electrocution
$0.00
The Camel Extreme Weather Liner has been successfully designed and developed into multiple components for ease of set up, strike, and packing. The insulated liner is fabricated from Climashield FR-SH Insulation 185 gram insulation. Our (insulated) liners are designed to assist field heaters and air conditioners at maintaining specific temperature ranges inside the shelter during operational use. Design considerations took into account the intent to limit lost air through openings and unprotected areas. Accordingly, liners were designed to overlap and fill vacancies and openings that can enable temperature loss. Camel provides insulated liner kits for a variety of military specification and COTS shelter systems. Camel has the capability to manufacture liner kits to your engineering drawings, or can reverse engineer parts supplied to fit your shelter applications.
- Climashield FR-SH Insulation 185 gram
- Berry Compliant
- Thickness 1.6 cm
- Flammability meets ASTM D6413
- Basic Weight oz/yd2 9.5
- Acoustic Performance STM E 1050 – 6300 (HZ) 0.49
- Absorption Coefficient
- No special tools required for installation
- 55% reduction in fuel consumption for heating/cooling
- Minimize number of convoys needed to resupply fuel
$0.00
The Modular General Purpose Tent System (MGPTS) utilizes tensioned fabric to create a structure which distributes wind, rain and snow loads from the fabric directly to the support system. Because of this design, the MGPTS distributes loads more efficiently with lighter support systems than conventional GP tents. The MGPTS serves as billeting, command and control, unit supply and field services shelters. The modular design consists of one type end and intermediate sections, one type of end pole, one type of side pole, and one internal Y-pole. The system is 18 feet wide and can be extended indefinitely by adding 18 foot intermediate sections.
$0.00
The LME is a frame supported lightweight shelter designed to provide units with a covered facility to conduct tactical maintenance operations. The LME is a modification of the Tent, Extendable, Modular, PERsonnel (TEMPER) where extensions are added to the tent frame to add the height needed for enclosure of tactical vehicle and equipment. The end walls have been modified with sliding fabric doors permitting total enclosure during conditions of extreme weather or blackout. The LME has 18-inch diameter duct openings in each of the 16 ft. intermediate fabric sections located below the windows. The U.S. Army and U.S. Marine Corps have adopted the LME as their standard maintenance shelter.
- Clear interior span of 24' x 32' (768 ft2)
- Eave height of 12 ft.
- Peak height of 15 ft. 6 in.
- Packed Weight of 1,435 lbs.
- Packed Volume of 108 ft3
- Successfully completed military durability, snow and wind loads performed by the US Army Aberdeen Test Center
$0.00
Dogwood's ConTEMProof-RD is a complete building solution packaged in 20' containers for simplified shipping, storage and deployment. Dimensions are65' interior clear span x 31'7" to the eave. Rapidly deployable with minimum equipment and manpower. Features hard sided steel panel construction and is fully relocatable. Includes robust environmental load resistance for global deployment. Soil supported modular footing system. Blast and ballistic resistant.
$0.00
EBS Developed a flat pack B-Hut system that is rapidly deployable and can be specified in either a 463L(15x30) deployment configuration or a containerized(16x32) deployment configuration. Each B hut is designed to be erected by a crew of 4 persons in 4hours including electrical lighting and HVAC